Updating the firmware

2010-05-12T03:04:12Z

69.171.136.98: /* Updating from an older to a newer firmware */

== What does it do? ==

Flashing a new image on your device will reset the device back to factory defaults and remove all data not on the memory card: preferences, bookmarks, installed applications, with a single exception that any previously-set lock code will be kept and not reset to the factory-default of "12345".

The "Backup/Restore" application only saves a list of your repositories and installed applications (the applications you can reinstall after flashing), files in <code>/home/user/MyDocs</code>, some settings in <code>/home/user</code>, gconf and <code>/etc</code>, and additional files reported by applications on install. In general, properly packaged applications tell the backup tool what to back up, but if you've created extra shell scripts or files outside MyDocs, you'll have to back them up yourself.

== Updating & Flashing your device ==

For Windows, Mac or Linux you can use flasher-3.5 which can be download from the [http://tablets-dev.nokia.com/maemo-dev-env-downloads.php tablets-dev] page. This page contains all installation packages include documentation for using the flasher.

# Download the [[Documentation/Maemo 5 Developer Guide/Development Environment/Maemo Flasher-3.5|Flasher]] for your device model: [http://tablets-dev.nokia.com/maemo-dev-env-downloads.php N900, N810, N800] or [http://tablets-dev.nokia.com/d3.php 770]
# Download the latest firmware image for your device model:
#* for [http://tablets-dev.nokia.com/nokia_N900.php N900]
#** for [[Maemo_UK_variant_firmware|UK devices]]
#* for [http://tablets-dev.nokia.com/nokia_N810wimax.php N810 WiMAX Edition]
#* for [http://tablets-dev.nokia.com/nokia_N810.php N810]
#* for [http://tablets-dev.nokia.com/nokia_N800.php N800]
#* for [http://tablets-dev.nokia.com/nokia_770.php 770] (or, for the Hacker Editions, [http://tablets-dev.nokia.com/os2007_hacker_edition.php OS2007HE] and [http://tablets-dev.nokia.com/os2008_hacker_edition.php OS2008HE])
# Ensure the battery is fully charged.
# Unplug the charger and switch off the device.

=== Linux ===

Once you have downloaded the flasher and the firmware image, follow these steps:

# If you downloaded the .deb version of the Flasher, install it with: <pre>sudo dpkg -i <flasher-package-name></pre>If you are using 64-bit Linux, you'll need to force installation as follows: <pre>sudo dpkg -i --force-architecture <flasher-package-name></pre>If you downloaded the .tar.gz version instead, you should untar it manually. The instructions below assume you have untarred it to the current directory.
# Turn off your device (''make sure you unplug the charger or else the device will not power down completely. You can plug the device back into power once it starts flashing'').
# On your PC, run: <pre>sudo flasher-3.5 -F <firmware-image> -f -R</pre>If you are using the .tar.gz package, use <pre>sudo ./flasher-3.5 -F <firmware-image> -f -R</pre>
# It will say: <pre>Suitable USB device not found, waiting</pre>
#* N900: Whilst holding the ‘u’ key, plug the USB back in. Wait until you get a dark screen with the NOKIA logo in the middle and a USB logo in the top right, and let go of the key.
#* N810, N800 and 770: Take your device, and hold down the Home/Swap button (looks like a little house on the N800 and 770, and two overlapping rectangles on the N810), and while holding down the Home/Swap button press the power button to turn it on. ''If it doesn't boot and start flashing, make sure the USB cable is plugged in.''
# It should start flashing and then reboot. You can remove the USB cable when the flasher program exits back to the shell prompt.

<pre>
from README_Flasher-3.5_beta coming with the flasher dowload tgz:

For Nokia NXXX device with Fremantle image flashing mode can be enabled by
1. Turn on Maemo device USB cable connected to PC but not to Maemo device
2. After successfull startup press and hold key 'u'
3. Attach USB cable on your Maemo device, still holding 'u'
4. After ~3 sec the Maemo device is in flashing mode, you can release 'u'

You will see USB image in the upper right hand corner of the screen if you did this correctly.

Maemo device will wait for flasher input indefinitely when it is in flashing mode.

NOTICE: Make sure that device battery is charged before doing any sort of flashing operation.
</pre>

----

====Flashing only the kernel from a FIASCO image====

If you only want to flash a kernel from a FIASCO image without overwriting your rootfs (e.g. because you tried out a different kernel and that didn't work) you can use the following flasher command instead of the one above:

sudo ./flasher-3.5 -F ''<firmware-image>'' --flash-only kernel -f -R

This will flash the kernel from the FIASCO image and the reboot your device. The rootfs will not be touched by this.

=== Mac OS X ===
There are two methods for flashing the device on OS X, using the GUI, with the 770Flasher application or using the console, much like the Linux flashing method. ''Both methods work fine for both the 770 and the N800/N810.''

==== GUI with 770Flasher ====
This is the easier of the two methods, and should be used by most people.

# Download the [http://maemo.org/downloads/product/PC/770flasher/ 770Flasher] (yes, it will work fine for flashing an N800 or N810). Latest flashers (Linux/Mac), which work also for N900, are also available on [http://tablets-dev.nokia.com/maemo-dev-env-downloads.php Latest Official Maemo Development Environment Page]
# Follow the [[#Flashing_your_Nokia_tablet|steps above]] to get the appropriate firmware image.
# Drag the firmware image (will end in .bin) onto 770Flasher.
# Follow the on-screen prompts.
# You should now see ''Suitable USB device not found, waiting'', switch on your device while holding the Home-button. Note for N810 users: switch on your device while holding the Swap button.
# Watch the messages as the image loads to the device after which it reboots automatically.

==== Console with Flasher-3.5 ====
These steps cover flashing the device with OS X using the Terminal. This is the more difficult than using [[#GUI_with_770Flasher|770Flasher]], but gives you access to the advanced options flasher-3.5 provides (like setting R&D flags, flashing only parts of the image, unpacking the image, etc).

# Follow the [[#Flashing_your_Nokia_tablet|steps above]] to get the appropriate firmware image and flasher.
# Turn off your device (''make sure you unplug the charger or else the device wont power down completely'') and plug in the USB cable to a port on the computer and the port on your device. N900 users cannot plug in the usb cable yet, as it would start recharging the battery.
# Open up the Terminal (located in /Applications/Utilities/) and run: <pre>sudo /usr/bin/flasher-3.5 -F <firmware-image> -f -R</pre> ''You will be asked for an administrator password, enter it.''
# It will say: <pre>Suitable USB device not found, waiting</pre>
# Unplug the power cord from the device, as this will prevent it from updating. Then take your device, and hold down the Home/Swap button (looks like a little house on the N800 and 770, and two overlapping rectangles on the N810 users do not need to hold down anything), and while holding down the Home/Swap button press the power button to turn it on. N900 users press ‘u’ button and plug the usb cable. Release button when flashing process begins. ''If the device does not boot and start flashing, make sure the USB cable is plugged in.''
# It should start flashing and then reboot. You can remove the USB cable after it has booted to a normal desktop (just make sure to eject any cards that may have mounted on your Mac).

=== Windows ===

==== N900: XP (SP3) / Vista (SP2) / Windows 7 32-bit ====

==== Updating from an older to a newer firmware ====

Microsoft Windows users wanting to '''update''' their [[N900]] can use the [http://europe.nokia.com/get-support-and-software/download-software/device-software-update Nokia Software Updater] or flash their devices (see the [[Documentation/Maemo 5 Developer Guide/Development Environment/Maemo Flasher-3.5|Flasher documentation]].)

The Nokia Software Updater can only be used when updating from a previous firmware to a new one. To reflash with the same firmware you currently have, or if you missed an update, use the flasher.

'''NOTE''': Install the current Nokia Software Updater (NSU) from Nokia website it fully supports Windows 7 now [http://nds1.nokia.com/files/support/global/phones/software/NokiaSoftwareUpdaterSetup_en.exe]

==== Flashing using the command line ====

In order to flash directly from the XP/Vista/Windows 7 command line, follow these steps:

# [http://tablets-dev.nokia.com/maemo-dev-env-downloads.php Download] and install the latest version of Flasher e.g. maemo_flasher-3.5_2.5.2.2.exe
# [http://tablets-dev.nokia.com/nokia_N900.php Download] the latest firmware (.bin) file and save it to %ProgramFiles%\maemo\flasher-3.5\ (the default installation path for Flasher) or to the custom path of your choice.
# Ensure the battery is at least half full.
# Unplug charger cable and switch off the device.
# Open the Command Prompt (Start then Run or Windows Logo key + R) and type '''cmd''' then press Enter.
# Change the directory to the Flasher's path (TIP: Use the TAB key to auto-complete the commands and file-names)<pre>cd "%ProgramFiles%\maemo\flasher-3.5"</pre>
# Hold the ''u'' key on the '''device''' keyboard and connect the USB cable at the same time (see the [[Documentation/Maemo 5 Developer Guide/Development Environment/Maemo Flasher-3.5|Flasher documentation]])
# Run the following command:<pre>flasher-3.5.exe -F RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin -f -R</pre>

Replace ''RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin'' with the firmware you wish to update (The name of the firmware image file you downloaded in the beginning).

The update will take approximately 4 minutes after which the N900 will reboot and display the Welcome Screen with Regional settings.

==== N900: Windows 64bit (Vista&7) ====
According to [http://talk.maemo.org/showpost.php?p=411019&postcount=67 this] post, windows driver signing can cause problems. You either need to turn on the loading of unsigned drivers or boot your computer to whole another OS.

===== Option 1 =====
Disabling signed driver detection is done by choosing the option "Boot without checking for signed drivers" (or something similar) in the boot-menu. To display the boot-menu press the "F8" key as soon as the windows boot process starts. The rest of the process is similar to XP.

===== Option 2 =====
Alternatively you can permanently disable driver checking via command line manager. There are good instructions for windows 7 available [http://www.killertechtips.com/2009/05/05/disable-driver-signing-windows-7/]

===== Option 3 =====
You can use [http://www.microsoft.com/windows/virtual-pc/download.aspx] Microsoft Virtual Pc
but when you connect your phone, press the "usb" button and select your device.

===== Option 4 =====

An alternative approach is to either download [http://www.ubuntu.com/getubuntu/download Ubuntu LiveCD] and burn it to cd or create a [https://wiki.ubuntu.com/LiveUsbPendrivePersistent persistent installation] to usb disk. After that you must get (another) usb stick where you will download [http://tablets-dev.nokia.com/maemo-dev-env-downloads.php maemo_flasher-3.5_2.5.2.2_i386.deb] -file (versions may vary) '''and''' firmware files needed for reflashing. Additionally one can save this page to usb stick just in case.

After that you only boot your LiveCD or persistent Ubuntu, install [[Documentation/Maemo 5 Developer Guide/Development Environment/Maemo Flasher-3.5|Flasher]] (doubleclick the file should work fine) and after that follow instructions from Linux - chapter.

==== N770/N800/N810 ====
Internet Tablet users can go to the appropriate support page for their device ([https://www.nokiausa.com/A41271130 N810 WiMAX Edition], [https://www.nokiausa.com/A4686323 N810], [https://www.nokiausa.com/A4410958 N800], or [http://europe.nokia.com/A4144790 770]), download and install the Software Update Wizard, run it and follow the on-screen prompts.

=== Flashing the eMMC in the N900 ===

{{ambox
|type=notice
|text=When flashing the eMMC content, always flash the FIASCO/Rootfs image first, then the eMMC. Do '''not''' boot up the device between the two!}}

Flasing the eMMC resets the MyDocs folder contents to factory settings. N900 users don't need to reflash the eMMC of their device. If you are reading this it's probably because you got a pre-production device e.g. in the Maemo Summit. If you have a sales unit and you have problems with your eMMC you should contact Nokia Care.

Also note that '''any backups created in your MyDocs area will need to be copied off the device to be safe across an eMMC flash''' as the MyDocs area and other partitions on <code>/dev/mmcblk0</code> will be erased.

Note that the eMMC images available do not contain pre-loaded maps. If you reflash your eMMC you will lose them (the Maps application will work as usual but you will need to download the maps needed).

In order to flash the eMMC, follow these steps:
* Fully charge the battery (IMPORTANT!!)
* Install [[Documentation/Maemo 5 Developer Guide/Development Environment/Maemo Flasher-3.5|Flasher]] for your OS (Linux, Mac OS X or MS Windows)
* Flash the FIASCO/rootfs image first using the above commands, '''WITHOUT''' the <code>-R</code> at the end of the command, keep the device plugged in after flashing.
* Grab the Vanilla eMMC image (.bin file) from [http://tablets-dev.nokia.com/nokia_N900.php the Nokia repository]
* Navigate to the directory where the image file was saved (Windows users: if you don't know the full path to the image, copy it to the flasher directory)
* Execute the following command (in Linux you have to be root!):
** Windows<pre>flasher-3.5.exe -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R</pre>
** Linux<pre>./flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R</pre>
** Debian based Linux (e.g Ubuntu)<pre>flasher-3.5 -F RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin -f -R</pre>
* Text similar to the following will be displayed on the computer:
<pre>
flasher v2.5.2 (Oct 21 2009)

Image 'mmc', size 241163 kB
Version RX-51_2009SE_1.2009.41-1.VANILLA
</pre>
* The dim Nokia screen will be displayed for a few seconds followed by progression dots. Text similar to the following will be displayed on the computer:
<pre>USB device found found at bus 001, device address 006.
Found device RX-51, hardware revision 2101
NOLO version 1.4.13
Version of 'sw-release': RX-51_2009SE_1.2009.42-11.002_PR_002
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus 001, device address 007.
Raw data transfer EP found at EP2.
[writing 74 % 179200 / 241163 kB 13180 kB/s]
Image(s) flashed successfully in 26.848 s (8982 kB/s)!
</pre>
* The flash will take around 1 minute after which the device will reboot.
* The bright Nokia screen will come up on the screen with the USB icon on the top right followed by progression dots with yellow LED blinking for a few seconds.

== Seamless Software Update ==

{{main|Seamless Software Update}}
[[:wikipedia:Maemo_(operating_system)#SSU|SSU]] is Nokia's new method for upgrading the devices over-the-air without requiring a reflash. When Nokia pushes an update over SSU, you will see an update notification and be given the option to install the update—just like with your computer.

Generally speaking, SSU updates should be relatively pain-free, but there are a few issues to watch out for:
* If you have an aftermarket kernel or intifs installed (like the rotation support kernel or [[Booting_from_a_flash_card#Install_bootmenu|fanoush's bootmenu]]) and a kernel or initfs upgrade is pushed, they will be overwritten and you'll need to wait for your kernel or the bootmenu to be updated to reinstall them.
* If you have extensively modified the home directory for user "user", such as moved all the documents to a memory card or removing or leaving empty some of the subdirectories

If the update doesn't show up for you at all, you may have accidentally (or intentionally) uninstalled osso-software-version-rx*4, which is required to update. You can get it back by simply running an <code>apt-get install osso-software-version-rx34</code>, for the N800, and an <code>apt-get install osso-software-version-rx44</code>, for the N810. Then updating your repository list in Application manager.

If the packages that caused osso-software-version-rx*4 to be removed are still installed, they will need to be removed completely (in the case of conflicting packages). Alternatively, for packages which are simply newer than those specified by osso-software-version-rx*4, you can install osso-software-version-rx*4-unlocked, which does not have strict dependencies.

On N900 (probably also previous devices), it's possible the application manager ends up with message stating that it's required to upgrade using the Nokia PC application. In this case please check out [[OTA to PR1.1 troubleshooting]].

You can show the list of packages that are not going to be ugraded with <code>apt-get update && apt-get upgrade</code>. In that case, you can try using <code>apt-get dist-upgrade</code> command (as root, the app manager has to be shut down) to override. '''This is not supported because you can break future updates'''.

== Troubleshooting ==

* If you get a "Permission denied" error then chmod +x flasher-2.0 or chmod +x flasher-3.0 to make the flasher tool executable. You may also need root permissions, run command with sudo or su to root.
* If you need to flash your Nokia 770 with an image from 2005 then use the [http://tablets-dev.nokia.com/d3.php older flasher] called "flasher" with no number in the name
* If you get "Error claiming USB interface: Device or resource busy" error, as root, run "modprobe -r cdc_phonet"
* If you cannot establish a connection with N900, do following steps:
*#turn off the device
*#remove battery
*#start flasher
*#plug the device to computer
*#insert battery
and see if it helps

===USB===

It may help to connect directly to the computer USB ports, avoiding the use of a hub - which includes the USB ports on laptop docking stations. The USB ports in the back of a laptop may also be better than using those in the front.

Some distributions do not present the USB device in the way that it expects it. First, see if it is necessary to "mount" USB:

<pre>mount -t usbfs usbfs /proc/bus/usb</pre>

If that does not work, try patching the ''flasher'' code. This replaces the use of /proc/bus/usb with the newer /dev/bus/usb filesystem:

<pre>perl -pi -e 's-/proc/bus/usb-/dev/bus/usb\000-;' -i.backup $FLASHER</pre>

Replace $FLASHER with the path to your flasher-2.0 or flasher-3.0 Linux binary.

[[Category:Users]]
[[Category:HowTo]]
[[Category:USB]]
[[Category:Power users]]
[[Category:N900]]

Sleeper

2010-05-12T02:57:32Z

69.171.136.98: /* Bugs */

===Overview===
[http://maemo.org/packages/view/sleeper/ Sleeper] is a widget for the Maemo desktop which allows your [[Nokia N900|N900]] to pause the music player (or the [[Panucci]] audiobook player) after a defined amount of time (e.g. 15 minutes). It's handy when listening to music while falling asleep.

New features in '''Sleeper 1.0''' (not yet in Maemo Extras, see [http://maemo.org/packages/view/sleeper/ Sleeper in Maemo Extras]):
* Vertical or horizontal bar with configurable minute values
* Optional widget icon for easy purpose recognition
* Optional information banners (you know, the yellow ones)

Discussion takes place over at talk.maemo.org:

* [http://talk.maemo.org/showthread.php?t=40764 Time based Music Stopper for N900]

===Screenshot===
[[Image:Sleeper-widget.png]]

===Help===
If the widget isn't show after installation, please reboot the phone and add it again (through the Desktop Edit mode > Add Widget)

===Authors===
* Main author: [http://maemo.org/profile/view/twaelti/ Tom Waelti] (initial version, extensive settings)
* Contributors: [http://maemo.org/profile/view/thp/ Thomas Perl] (Panucci integration, refactoring)
* Thanks to [http://maemo.org/profile/view/brentdc/ Brent Chiodo], the author of TouchSearch for the nice code for widget settings - saved me HOURS :-)

===ChangeLog===
The [http://maemo.org/packages/view/sleeper/ current changelog] is available through the package viewer.
* 1.2.0: Added FM Radio support by tpl/pycage. Added volume fade out. Now with shutdown option
* 1.1.0: Added Panucci support by thp. Now fully configurable through settings dialogue. Using Help/About/Donate framework.
* 1.0: Merged with work from thp, fully configurable through settings dialog. Online help. Donation button.
* 0.2.x: Unofficial versions by thp, inclusion of Panucci support, refactoring. (only published as .debs)
* 0.2.0: Now able to display/toggle state and abort timer
* 0.1.0: Initial release

===Roadmap===
* Add support for other media players if they are accessible through D-Bus

===Wishlist===
Use this space to add possible feature wishes:
* WISH (YOUR NAME)
* <del>Shutdown the N900 ([[User:twaelti|twaelti]])</del>
* <del>Fade out the volume before pausing [[User:thp|thp]])</del>
* Add support for MediaBox ([[User:thp|thp]], see the headphoned source)

===Bugs===
Use this paragraph to report possible bugs:
* None known for now ([[User:twaelti|twaelti]])
please make it impossible to create more then 1 widget

===Patches===
Use this space for submitting patches to Sleeper (twaelti will hopefully integrate them in one of the next releases, if the patch fits the goals of the Sleeper project):

* <del>[http://khan.thpinfo.com/~thp/tmp/0001-Support-for-pausing-pycage-s-FM-Radio.patch Support for stopping FM Radio] by thp (D-Bus support in FM Radio's SVN)</del> Integrated in 1.2.0

[[Category:Software]]

Maemo Wiki Mirror - User contributions [en]

Updating the firmware

Sleeper